Requirements
On this page
Moorhold runs on one server that you control. This page lists what that server, its network and you need before you install. The install guides repeat the parts that matter for each provider.
These requirements are for the latest release, 2026.11.4, which the install guides install.
The server
Section titled "The server"| Full profile | Core profile | |
|---|---|---|
| What it runs | Every tool, with the dashboards tool (Superset) and the data catalogue (DataHub) | Every tool except the dashboards tool and the catalogue |
| Memory | 12 GB | 8 GB |
| The installer stops below | 11 GiB | 5.5 GiB |
| Processor | x86-64 (Intel or AMD) | x86-64 (Intel or AMD) |
| Disk | At least 100 GB, ideally an SSD | At least 100 GB, ideally an SSD |
- Measured. The floor test on 9 November 2026 passed the core profile and the light profile, which the Moorhold app for Mac uses, on a server with 2 vCPU and 4 GB of memory, and the full profile on one with 6 vCPU and 12 GB.
- Memory. If the server has too little, the installer stops with "this server has … GiB of memory". Use the core profile, or add memory.
- More memory for a tool. On a full server with less than about 24 GB of memory (the 12 GB and 16 GB sizes included), or a core server with 8 GB, more memory for a tool is refused: the portal says the server hasn't room, because Moorhold keeps 4.5 GiB spare above its apps' limits.
- Processor. A Moorhold server needs an x86-64 processor. ARM servers aren't supported, and the installer stops on one. The Moorhold app for Mac runs Moorhold on Apple silicon, in a virtual machine.
- Disk. Allow more than 100 GB if you keep backups or a large data lake on the same disk.
Operating system
Section titled "Operating system"Ubuntu 24.04 LTS or Ubuntu 26.04 LTS. Ubuntu 26.04 needs release 2026.10.1 or later. The installer also accepts Debian 12, though the install guides are written for Ubuntu.
A fresh server install is simplest. A desktop install (Ubuntu, Kubuntu and similar) works too, with the extra checks in Install on your own server.
The network
Section titled "The network"- A domain where you can add two DNS records. For example
data.yourorg.examplefor the portal, and the wildcard*.data.yourorg.examplefor the tools. If your DNS provider doesn't accept a wildcard, add three records instead:superset.data,datahub.dataandairflow.data. With the core profile, onlyairflow.datais used. - A public IPv4 address that reaches the server, with TCP ports 80 and 443 open to the internet. The server gets its certificates from Let's Encrypt, so both ports have to be reachable.
- Or a Moorhold relay, if the server is behind a home or office router that can't do that. A relay is a small cloud server of your own that passes connections on to your server. It's meant for carrier-grade NAT, blocked ports and routers without NAT loopback. The relay is optional, and we haven't tried it on a real cloud server.
From Moorhold
Section titled "From Moorhold"- An access key. Your server uses it to download Moorhold. You create it in your Moorhold account at account.moorhold.dev. An organisation's first key is approved by a person at Moorhold, so allow for that.
The key can only download Moorhold's software. It can't read or change anything on your server. Keys expire after 12 months unless you renew them, and you can revoke one at any time. Moorhold keeps running if a key is revoked or expires.
From your provider
Section titled "From your provider"- For a cloud server, an account with the provider. The install guides name the machine types that meet these requirements, as each provider published them on 5 October 2026. Providers change what they offer, so check before you buy.
- For your own server, the hardware, a connection with a public address, and access to your router's port forwarding.
For a cloud server, you don't need to install anything on your own computer.
Moorhold's desktop app is for Macs with Apple silicon, and you can download it from moorhold.dev/download. There's no Windows app, and we aren't giving a date for one. On any other computer, run Moorhold on a server and use it in your web browser.
Check a server before you install
Section titled "Check a server before you install"From release 2026.10.8, the installer can check a server without installing anything:
sudo bash install.sh --check --hostname data.yourorg.exampleIt runs the installer's checks and stops. It asks for no key and installs nothing. It checks the operating system, the memory and free disk for the profile, ports 80 and 443, and the network. If the server lacks a tool the check needs to verify the release, it names the package to install.
- Install on IONOS Cloud, our recommended provider
- Install on Hetzner Cloud
- Install on your own server